Plettenberg HP 220/25 With Gear Inrunner Brushless DC Electric Motor
Plettenberg HP 220/25 With Gear Inrunner Brushless DC Electric Motor is one of the HP 220 series of brushless motors with an integrated gearbox. The motors are a lightweight alternative to direct drives. They are built with 4 or 6 poles which allows a variation to power and voltage. The planet-type gears are fitted with needle bearings while the F5B competition motors are fitted with ball raced planet-gears. The rotor are armoured with kevlar and can withstand up to 70.000 RPM without problem. Special features are the 6mm hardened drive shaft, the quadruple ball bearings and the neodym magnets.
Note: The motors of this series are not suitable for pure power planes.
|HP 220/25 Gear|
|weight about:||250 g|
|shaft diameter:||6 mm|
|variants:||2, 3 windings|
|cells:||3 – 5 LiPo|
|RPM with no load 1/min/Vol|
|HP 220/25/A3 P4 5:1||480 1/min/Volt|
|HP 220/25 A1 P6 5:1||TBC 1/min/Volt|
|HP 220/25/A3 P4 5:1||medium glider||3 – 5 LiPo||15 x 9,5“ – 17 x 10“||83%|
|HP 220/25/A3 P4 5:1|
|prop:||voltage in V||current in A||rpm 1/min||Eta.max %||thrust in N|
|Cam Prop 16″x10″ Klapp||12,5||31,3||5275||83||17,2|
|Cam Prop 17″x10″ Klapp||11,1||36,1||4500||83||22,6|
Note: The images, instructions and drawings relating to the product being sold on this page are subject to copyright ownership and are the intellectual property of Plettenberg Elektro Motoren. They are displayed solely for the purposes of selling Plettenberg Elektro Motoren products or otherwise adding value to the Plettenberg Elektro Motoren brand.